Lubritek Ep Greases
Extreme Pressure Lithium Greases
Lubritek Ep Greases
KYROS LUBRITEK EP GREASES are premium quality lithium soap thickened greases containing Extreme Pressure (EP) Additives for enhanced load bearing capabilities. These greases are formulated from low volatile high viscosity index mineral oils, superior fats / fatty acids and a synergistic blend of safe, non-leaded additives for optimum performance.
Product Features & Benefits
- Multifunctional products with enhanced extreme pressure capabilities.
- Enhanced extreme pressure capabilities to protect against wear under heavily
loaded conditions. - Highly resistant to water; provide adequate protection against rust and oxidation.
- Shear stable and suitable for all types of dispensing systems including centralized
lubrication.
Application Areas
KYROS LUBRITEK EP GREASES are recommended for various heavy duty industrial applications where heavy or shock loads are encountered at temperatures up to 1200 C. KYROS LUBRITEK EP GREASES are particularly recommended for general purpose use in steel, cement and paper plants, mining and heavy industries and automotive units for all types of bearings, couplings, and sliding mechanisms. These greases are also suitable for use on centralized lubrication systems.
Packing
KYROS LUBRITEK EP GREASES are available in NLGI grades No.3 to 000 and are offered in 180 kg steel drums and 18 kg HDPE pails.
Technical Data
| Test Description | Test method | Typical Properties -EP3 | Typical Properties -EP2 | Typical Properties -EP1 | Typical Properties -EP0 | Typical Properties -EP00 | Typical Properties -EP000 |
|---|---|---|---|---|---|---|---|
| NLGI Grade | — | 3 | 2 | 1 | 0 | 00 | 000 |
| Thickener type | — | Lithium Base | Lithium Base | Lithium Base | Lithium Base | Lithium Base | Lithium Base |
| Appearance | Visual | Dark brown coloured,Translucent | Dark brown coloured,Translucent | Dark brown coloured,Translucent | Dark brown coloured,Translucent | Dark brown coloured,Translucent | Dark brown coloured,Translucent |
| Structure | visual | Smooth & Buttery | Smooth & Buttery | Smooth & Buttery | Smooth & Buttery | Smooth & Buttery | Smooth & Buttery |
| WorkedPenetration@2 50 C,60 Strokes, mm/10 | ASTM D 217 | 220 -250 | 265- 295 | 310- 340 | 355 -385 | 400 – 430 | 445 – 475 |
| Dropping Point, 0C, Min | ASTM D 566 | 180 | 180 | 180 | 170 | 170 | 170 |
| Base Oil Viscosity @ 400C, cSt | ASTM D 445 | 90 -110 | 90 -110 | 90 -110 | 90 -110 | 90 -110 | 90 -110 |
| Copper Corrosion, rating, Max |
ASTM D 4048 | 1 | 1 | 1 | 1 | 1 | 1 |
| Oil Separation, %, Max | ASTM D 6184 | 6 | 6 | 6 | – | – | – |
| Water Washout, %, Max |
ASTM D 1264 | 10 | 10 | 10 | 10 | — | — |
| Oxidation Stability,PSI, Max |
ASTM D 942 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 |
| Dynamic Anti-Rust Test(Emcor Test),rating |
IP 220 | 0,0 | 0,0 | 0,0 | 0,0 | 0,0 | 0,0 |
| Four Ball Weld Load, Kgs |
ASTM D 2596 | 200 | 200 | 200 | 200 | 200 | 200 |
Disclaimer
The information given in this data sheet is based on extensive tests and practical experience and is given in good faith. It cannot however, provide an absolute
guarantee of success in all varied areas of application. For this reason, practical trials are recommended.
guarantee of success in all varied areas of application. For this reason, practical trials are recommended.
