Avalon HVI ZF Pro

Heavy Duty Long Drain Zinc-free Hydraulic Oil

Hydraulic Oils

Avalon HVI ZF Pro

description

Download PDS
Veedol Avalon HVI ZF Pro is a range of Zinc-free, environment friendly hydraulic oils specially developed to meet the needs of the most demanding modern hydraulic systems found in mobile equipment.

Formulated from high quality base stocks and specially selected zinc free additives to give exceptionalprotection in severe hydraulic applications. Veedol Avalon HVI ZF Pro exhibits excellent oxidation and thermal stability properties which can provide extended oil and filter life, as well as optimum equipment protection, thereby reducing both maintenance and product disposal costs. They are suitable for use in environmentally sensitive applications that require hydraulic oils containing ashless additives.

Features/Benefits

  • High thermal and oxidation stability prolongs oil and equipment life.
  • Outstanding filterability, faster air release and water separation contribute to enhance and maintain efficiency of hydraulic system.
  • Excellent sludge control over a wide temperature range helps maintain system cleanliness and reduce deposits, enable longer oil, and filter life thus reduce downtime and operating costs.
  • Zinc-free formulation for environment friendly applications.
  •  NAS 6 cleanliness level ensures smooth operation of hydraulic systems employing close clearance servo valves.

Performance Specification:

Veedol Avalon HVI ZF Pro hydraulic oils meet & exceed the performance requirements of

  • DIN 51524-3, HVLP
  • Parker HF-0, HF-1, HF-2
  • Bosch Rexroth RD 90220
  • Eaton M-2950-S & I-286-S3
  • Fives Cincinnati P-70, P-69
  • ASTM D 6158

Application:

  • Recommended for earth moving equipment requiring Zinc-free hydraulic oils.
  • Hydraulic systems operating in environmentally sensitive zones.
  • Hydraulic applications requiring extended oil drain interval.
  • Also suitable for industrial hydraulic systems requiring Zinc-free hydraulic oils

Typical Properties:

Parameters Test Method 46 68
Density at 29.5ºC ASTM D4052 0.845 0.850
Kinematic Viscosity @ 40ºC, cSt ASTM D445 46.5 67.5
Kinematic Viscosity @ 100ºC, cSt ASTM D445 7.85 10.37
Viscosity Index ASTM D2270 140 140
Flash Point (COC), ºC ASTM D92 250 255
Pour Point, ºC ASTM D97 -33 -36
Copper Corrosion at 100 ºC, 3 hours ASTM D130 1a 1a
Foaming Tendency/ Stability
Sequence I, mL/mL
Sequence II, mL/mL
Sequence III, mL/mL		 ASTM D892 0/0
10/0
0/0		 0/0
10/0
0/0
Rust Test ASTM D665 Pass Pass
Air release at 50ºC, minutes ASTM D3427 4’01” 4’00”
TOST Life, hrs. ASTM D943 >7500 >7500
Oil cleanliness level, max NAS 1638 NAS 6 NAS 6

The above typical properties are those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.

Storage:

All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum
markings.

Health and Safety:

The information on this product is available in the Material Safety Data Sheet (MSDS) as a guide to the precautions and safe handling of this product and its disposal. For further information, we recommend you review the MSDS. If handled correctly, there are no special precautions suggested.
×

Request Quote

    Request Quote