Avalon HVI Pro
Extra Heavy Duty Long Drain Hydraulic Oil
Avalon HVI Pro
Veedol Avalon HVI Pro hydraulic oils are high viscosity index, shear stable hydraulic oils meant for systems working under wide temperature range.
Blended with premium quality base oils, advanced zinc-based additives, and shear stable viscosity modifiers, they exhibit excellent viscosity control under severe mechanical stress and a wide range of temperatures. Also provide outstanding protection to the hydraulic systems in most demanding conditions.
Features/Benefits
- Outstanding resistance to degradation at high pressure, temperature and mechanical stress provide longer oil life.
- Excellent thermal and oxidation stability minimizes deposit formation, enhances system cleanliness, helps extend oil and filter life, thus reducing maintenance cost.
- High viscosity index resists change in viscosity over wide range of temperatures improving hydraulic efficiency.
- Excellent hydrolytic stability provides improved protection to yellow metals in hydraulic system.
Performance Specification:
Veedol Avalon HVI Pro hydraulic oil meets & exceeds the performance requirements of
- Denison Hydraulics HF-0, HF-1, HF-2
- Vickers M-2952-S, I-286-S, M-2950-S
- Mannesmann Rexroth RE 07 075
- ISO Standard 6743 Part 4, Type HV
- DIN 51524 Part 3 HVLP
Application:
- Moderate- to high-pressure hydraulic systems operating outdoors in severe cold regions or where there is a wide variation in ambient temperature.
- Mobile equipment requiring high viscosity index hydraulic fluids
- Hydraulic equipment used in marine, construction, mining, and oil-industries
Typical Properties:
| Parameters | Test Method | 46 | 68 |
|---|---|---|---|
| Density at 29.5ºC | ASTM D4052 | 0.845 | 0.849 |
| Kinematic Viscosity @ 40ºC, cSt | ASTM D445 | 47.5 | 67.83 |
| Kinematic Viscosity @ 100ºC, cSt | ASTM D445 | 8.22 | 10.95 |
| Viscosity Index | ASTM D2270 | 147 | 153 |
| Flash Point (COC), ºC | ASTM D92 | 240 | 246 |
| Pour Point, ºC | ASTM D97 | -39 | -33 |
| Copper Corrosion at 100 ºC, 3 hours | ASTM D130 | 1a | 1a |
| Foaming Tendency/ Stability Sequence I, mL/mL Sequence II, mL/mL Sequence III, mL/mL |
ASTM D892 | 0/0 10/0 0/0 |
0/0 10/0 0/0 |
| ASTM D665 | Pass | Pass | |
| FZG Fail load stage (A/8.3/90) | DIN 51354-2 | 12 | 12 |
The above typical properties are those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum
markings.
markings.
Health and Safety:
The information on this product is available in the Material Safety Data Sheet (MSDS) as a guide to the precautions and safe handling of this product and its disposal. For further information, we recommend you review the MSDS. If handled correctly, there are no special precautions suggested.
