Solucut Multi Metal Pro
Semi Synthetic High Oil Metal Working Fluid
Solucut Multi Metal Pro
TWOCIL advises the use of automated mixing systems. If mixing manually, always add the concentrate to the water with maximum agitation. If water is added to the concentrate, the emulsions may prove unstable. Avoid mixing with very cold concentrate or water.
Features & Benefits:
- Triazine free BiocidesFree from hazardous chemical, reduced risk of operators health & safety.
- Chlorine Sulphur and Phosphorus free Make it environmentaly friendly. low disposal cost
- Excellent Emulsion Stability Good compatibility with waters of 50 ppm – 500 ppm (Calcium carbonate) hardness.
- Designed for Low foamingAdvanced defoamer additive make it ideal for lower foaming tendency even in soft water.
- 000 Ideal Choice forHigh-and low-pressure CNC systems.
- Built-in Lubricity TechnologyLubricity molecules create a thin robust film preventing direct metal-to metal contact providing boundary lubrication.
- Long-life MWFMulti metal machining with good corrosion protection for components and machine tools.
Product Management:
The working concentrations should be carefully controlled and monitored daily as higher & lower working concentrations will have performance, health and safety implications.
Material:
- All aluminium alloys, including aerospace
- Stainless steels, titanium alloys
- Inconel and other heat resistant super alloys
- Multi Metal Pro is excellent choice for automotive and aerospace alloys and yellow metals
- Oil-resistant plastics and other non-ferrous materials
Typical Properties:
| Properties | Test method |
|---|---|
| General machining | 5-6% |
| Thread cutting and forming | 6-8% |
| Deep hole drilling and boring | 8-10% |
| Reaming | 8-10% |
| Grinding | 3-4% |
The concentrations vary depending on the type of machining
Typical Properties:
| Appearance | Amber Liquid |
|---|---|
| Oil Content | Approx 56% |
| Stability (0°C/Ambient/50°C) | Passes |
| Emulsion Type @ 5% in tap water | Milky |
| Cast Iron Corrosion IP 287, 3.0 % in 200 ppm | Passes |
| Defoam in 50 ppm water | Nil in 60 seconds |
| Refractometer Factor | 1.0 |
The above typical properties are those obtained with normal production tolerance and do not constitute as specification Variations that do not affect product performance are to be expected during normal manufacturing processes and at different blending locations. The information contained herein is subject to change without notice.
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum markings.
Fluid Maintenance :
Poor or incorrect emulsion preparation may lead to instability and could considerably shorten the life of the emulsion. Prior to making any fresh emulsion, it is highly recommended to use compatible system cleaner for purging the machine tool coolant system.
Health, Safety and Environment :
The information on this product is available in the Material Safety Data Sheet (MSDS) as a guide to the precautions and safe handling of this product and its disposal. For further information, we recommend you review the MSDS. If handled correctly, there are no special precautions suggested.
