Solucut FE Pro
Low-Oil Semi Synthetic Metalworking Fluid
Solucut FE Pro
Performance Features & Benefits:
- Stable Emulsion Readily forms a pink colored translucentstable emulsion in a variety of water qualities, providing clear visibility of tool and work piece.
- Low Mineral Oil Content Approx. 19% mineral oil content gives clean machining & better work piece visibility.
- Excellent Emulsion Stability Tolerant to difficult diluent water.
- Excellent Field Performance Offers optimum performance in good quality water having hardness between 50 – 400 ppm.
- Ideal Choice for High and low-pressure CNC systems. Performs excellently for light to medium duty machining and grinding of ferrous alloys.
- Designed for Low Foaming Advanced defoamer additive makes it ideal for lower foaming tendency even in soft water.
Product Management:
Materials:
- Cast Iron & SG Iron
- Most ferrous alloys from low, medium carbon steel to forged steel
- Oil-resistant plastics and other non-ferrous materials such as free cutting Aluminium
Typical Recommended Concentrations:
:
| Properties | Test method |
|---|---|
| General machining | 5-6% |
| Thread cutting and forming | 6-8% |
| Deep hole drilling and boring | 8-10% |
| Reaming | 8-10% |
| Grinding | 3-5 |
The concentrations vary depending on the type of machining operations.
Typical Properties:
| Appearance | Pink Dyed Liquid |
|---|---|
| Stability (0°C/Ambient/50°C) | Passes |
| Emulsion Type @ 5% in tap water | Pinkish Translucent |
| Cast Iron Corrosion IP 287, 3.0 % in 200 ppm | Passes |
| pH @ 5% in deionized water | 9.5 |
| Defoam in 50 ppm water | Nil in 60 seconds |
| Refractometer Factor | 1.50 |
Note: Refractometer reading should be between 4 to 5 markings
The above typical properties are those obtained with normal production tolerance and do not constitute as specification Variations that do not affect product performance are to be expected during normal manufacturing processes and at different blending locations. The information contained herein is subject to change without notice.
Fluid Maintainance:
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum markings.
