Aturbrio
Steam, Gas and Hydropower Turbine Oil
Aturbrio
Veedol Aturbrio oils are high performance turbine oils meant for lubrication of industrial steam, gas, and hydropower turbines and suitable for turbocompressors as well.
Formulated from high quality base oils and zinc-free additives, they offer improved performance, meeting the requirements of most demanding industrial turbines requiring no enhanced anti-wear performance for gearboxes.
Features/Benefits
- Outstanding Oxidation Stability minimizes deposit formation and filter plugging. Ensures longer operating life, lowers maintenance and operating cost.
- Excellent Water Separability helps easy removal of water from lubrication system minimizing corrosion and rusting, increasing equipment reliability.
- Faster Air Release and High Resistance to Foaming reduces the possibility of cavitation failure, premature oil oxidation.
- Good Thermal Stability provides resistance to thermal breakdown to offer optimum life and performance.
Performance Specification:
Veedol Aturbrio meet & exceed the performance requirements of
- Siemens TLV 901304
- Alstom HTGD 90117
- DIN 51515 part I & II
- GEK 32568, 27070, 46505E
- IS 1012: 2002 (Reaffirmed 2018)
Application:
- Recommended for use in most modern steam, gas and hydropower turbines requiring no enhanced
anti-wear performance for the gearboxes - Centrifugal, axial, and turbocompressors where R&O type turbine oils are recommended.
- Also suitable for lubrication of bearings requiring high control over rust and corrosion.
Typical Properties:
| Parameters | Test Method | 32 | 46 | 68 |
|---|---|---|---|---|
| Density@29.5 ºC | ASTM D4052 | 0.843 | 0.845 | 0.850 |
| Kinematic Viscosity @ 40ºC, cSt | ASTM D445 | 32.4 | 46.8 | 68.8 |
| Kinematic Viscosity @ 100ºC, cSt | ASTM D445 | 5.77 | 7.39 | 9.26 |
| Viscosity Index | ASTM D2270 | 120 | 120 | 111 |
| Flash Point (COC), ºC | ASTM D92 | 236 | 238 | 248 |
| Pour Point, ºC | ASTM D97 | -18 | -18 | -15 |
| Copper Corrosion at 100 ºC, 3 hours | ASTM D130 | 1a | 1a | 1a |
| Foaming Tendency/ Stability Sequence I, mL/mL Sequence II, mL/mL Sequence III, mL/mL |
ASTM D892 | 0/0 10/0 0/0 |
0/0 10/0 0/0 |
0/0 10/0 0/0 |
| TOST life, hour | ASTM D943 | > 10,000 | > 10,000 | > 10,000 |
| Total Acid Number, mg KOH/g | ASTM D664 | 0.10 | 0.10 | 0.11 |
| Rust Test | ASTM D665 | Pass | Pass | Pass |
| Air Release @ 50ºC, minutes | ASTM D3427 | 1’52” | 3’04” | 5’41” |
| Water separability, minutes | ASTM D1401 | 2’21” | 2’25” | 6’37” |
| RPVOT (Oxidation stability), minute | ASTM D2272 | >1700 | >1700 | >1700 |
The above typical properties are those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum
markings.
markings.
Health and Safety:
The information on this product is available in the Material Safety Data Sheet (MSDS) as a guide to the precautions and safe handling of this product and its disposal. For further information, we recommend you review the MSDS. If handled correctly, there are no special precautions suggested.
Similar Products
Engine Oils
Hydraulic Oils
Transformer Oils
