Avalon IM
Heavy Duty Long Drain Zinc-free Hydraulic Oil
Avalon IM
Veedol Avalon IM exhibit excellent oxidation and thermal stability properties which can provide extended oil and filter life, as well as optimum equipment protection, thereby reducing both maintenance and product disposal costs. They are suitable for use in environmentally sensitive applications that require hydraulic oils containing ashless additives.
Features/Benefits
- Excellent sludge control over a wide temperature range helps maintain system cleanliness and reduce deposits, enable longer oil, and filter life thus reduce downtime and operating costs.
- High thermal and oxidation stability prolongs oil and equipment life.
- Outstanding filterability, faster air release and water separation contribute to enhance and maintain efficiency of hydraulic system.
- Zinc-free formulation for environment friendly applications.
- NAS 6 cleanliness level ensures smooth operation of hydraulic systems employing close clearance servo valves.
Performance Specification:
- DIN 51524-2, HLP
- Parker HF-0, HF-1, HF-2
- Bosch Rexroth RD 90220
- Eaton M-2950-S & I-286-S3
- Fives Cincinnati P-70, P-69
- ASTM D 6158
Application:
- Recommended for plastic molding machines, hydraulic press and earth moving equipment requiring Zinc-free hydraulic oils.
- Hydraulic applications requiring extended oil drain interval.
- Hydraulic systems operating in environmentally sensitive zones
Typical Properties:
| Parameters | Test Method | 46 | 68 |
|---|---|---|---|
| Density at 29.5ºC | ASTM D4052 | 0.845 | 0.850 |
| Kinematic Viscosity @ 40ºC, cSt | ASTM D445 | 46.5 | 67.5 |
| Kinematic Viscosity @ 100ºC, cSt | ASTM D445 | 7.85 | 10.37 |
| Viscosity Index | ASTM D2270 | 140 | 140 |
| Flash Point (COC), ºC | ASTM D92 | 250 | 255 |
| Pour Point, ºC | ASTM D97 | -33 | -36 |
| Copper Corrosion at 100 ºC, 3 hours | ASTM D130 | 1a | |
| Foaming Tendency/ Stability Sequence I, mL/mL Sequence II, mL/mL Sequence III, mL/mL |
ASTM D892 | 0/0 10/0 0/0 |
0/0 10/0 0/0 |
| Rust Test | ASTM D665 | Pass | Pass |
| Air release at 50ºC, minutes | ASTM D3427 | 4’01” | 4’00” |
| TOST Life, hrs. | ASTM D943 | >7500 | >7500 |
| Oil cleanliness level, max | NAS 1638 | NAS 6 | NAS 6 |
The above typical properties are those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice.
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum markings.
