Solucut
Water Miscible Metal Working Fluid Boron Free
Solucut
TWOCOIL advises the use of automated mixing systems. If mixing manually, always add the concentrate to the water with maximum agitation. If water is added to the concentrate, the emulsions may prove unstable. Avoid mixing with very cold concentrate or water.
Performance Features & Benefits:
- Nitrite, Boron & Triazine Biocide free Free from hazardous chemical, reduced risk of operators health & safety.
- Chlorine, Sulphur and phosphorous-free Make it environmentally friendly, low disposal cost.
- Excellent Emulsion Stability Tolerant to difficult diluent water with hardness upto 500 ppm.
- Excellent Metal Passivation It provide good corrosion protection for Aluminium and non-ferrous metals.
- Excellent Field Performance Soft foaming in salt water.
- Corrosion Inhibition Corrosion protection for ferrous provide excellent tool life and surface finish.
Product Management:
The working concentrations should be carefully controlled and monitored daily as higher & lower working concentrations will have performance, health and safety implications.
Material:
- Ferrous alloys
- Aluminium alloys
- Copper and yellow metal alloys
- Oil-resistant plastics & non-ferrous materials
Typical Recommended Concentrations:
| Properties | Test method |
|---|---|
| General machining | 5-7% |
| Thread cutting and forming | 6-8% |
| Deep hole drilling and boring | 8-10% |
| Reaming | 8-12% |
| Grinding | 3-6% |
The concentrations vary depending on the type of machining operations
Typical Properties:
| Appearance | Amber Liquid |
|---|---|
| Stability (0°C/Ambient/50°C) | Passes |
| Emulsion Type @ 5% in tap water | Milky |
| Cast Iron Corrosion IP 287, 3.0 % in 200 ppm | Passes |
| pH @ 5% in deionized water | 9.5 |
| Defoam in 50 ppm water | Nil in 60 seconds |
| Refractometer Factor | 1.0 |
Fluid Maintenance :
Poor or incorrect emulsion preparation may lead to instability and could considerably shorten the life of the emulsion. Prior to making any fresh emulsion, it is highly recommended to use compatible system cleaner for purging the machine tool coolant system.
Storage:
All packages should be stored under cover. It should not be exposed to direct sunlight, intense cold and extreme temperature fluctuations. Where outside storage is unavoidable, drums should be laid horizontally or properly covered to avoid the possible ingress of water and damage to drum markings.
Health, Safety and Environment :
The information on this product is available in the Material Safety Data Sheet (MSDS) as a guide to the precautions and safe handling of this product and its disposal. For further information, we recommend you review the MSDS. If handled correctly, there are no special precautions suggested.
